SK
DE
IT
RU
CN
Series
The W series represents a wide range of TwinSpin ® high precision reduction gears with a cylinder shaped case. The W series high precision reduction gears comprise an accurate reduction mechanism and high-capacity radial and axial cylindrical roller bearings. This design of reduction gears allows the mounting of the load directly on the output flange or the case without the need of additional bearings. The W series high precision reduction gears are characterized by a modular design, which allows the mounting of desirable motor type to the reduction gear by means of a motor connection flange. The W series includes TwinSpin ® high precision reduction gears that are not completely sealed; an inlet flange and a gasket kit have to be used for the sealing. Upon the customer’s request, SPINEA ® is able to supply a completely sealed reduction gear with a flange according to the customer’s motor.
TECHNICAL SPECIFICATIONS
RIGHT TO CHANGE WITHOUT PRIOR NOTICE RESERVED
1) Max allowable output speed may be limited by heat depending on the operating rate.
Make sure the surface temperature of the reduction gear does not exceed case temperature 65 °C during use.
2) The parameter depends on the version of the reduction gear ratio and lost motion
3) Load at output speed 15 rpm and L10=12 000 hrs
4) The parameter values are informative. Exact value depends on the specific version of the reduction gear